Designed for workgroups and departments, TL-SL5428E from TP-LINK provides full set of layer 2 management features. It delivers maximum throughput where you need it - to high-performance workgroups at the edge of the network, or as a backbone for Fast Ethernet switches and high-speed servers indemanding small networks. Moreover, TL-SL5428E switch also comes equipped with 4 combo SFP slots, giving you greater network flexibility
This TP-LINK L2 managed switch has robust security and management features. An advanced Access Control List (ACL, L2 to L4) and the TP-LINK strong safeguard provide security coverage from core to edge and protect against broadcast storm, ARP and Denial-of-Service(DoS) attacks, etc. Quality of Service (QoS, L2 to L4) provides enhanced traffic management capabilities to move your data smoother and faster. Anymore, the easy-to-use web management interfaces, along with CLI, SNMP and RMON, mean faster setup and configuration with less downtime. For workgroup and departments requiring cost-sensitive Layer 2 Switch, and additional Gigabit capability, TP-LINK L2 fully managed Switch TL-SL5428E can provide you the ideal access-edge solution
The TP-LINK fully managed L2 switch TL-SL5428E provides non-blocking switching solution for a 10/100Mbps fast Ethernet connection. As to the switching capacity, TL-SL5428E has a non-blocking aggregated bandwidth of 12.8Gbps. It provides 24 10/100Mbps ports and 4 gigabit 10/100/1000BASE-T ports. All of these ports are combo gigabit ports, which will be disabled if the corresponding 1000BASE-X SFP slots are used. It can give you greater network flexibility
IP Clustering allows up to 32 TL-SL5428E switches to be managed by a single IP, regardless of geographical locations. With all units identified by a single IP address, the stack could be configured, monitored, maintained as a single object
Traffic running across units in this virtual stack utilizes full-duplex interfaces and network wires, eliminating costly and cumbersome cables, minimizing the impact of any single point of failure
Access Control Lists (ACL, L2 to L4) restrict access to sensitive network resources by denying packets based on source and destination MAC address, IP address, TCP/UDP ports and even VLAN ID. This is done by hardware, so switching performance would not be compromised
Moreover, the TL-SL5428E switch supports 802.1X authentication, which is used in conjunction with a RADIUS server to require some authentication information before access to the network is allowed. And more, it supports Guest VLAN to enable the non-802.1X clients to access the specific network resource. In addition, IP-MAC-Port-VID Binding, Port Security, Storm control, DHCP Snooping and IP Source Guard support can protect against broadcast storms, ARP and Denial-of-Service(DoS) attacks, etc. Regarding to the DoS defending, TL-SL5428E provides you some typical DoS attacks to select. You can protect these attacks more easily ever than before. TL-SL5428E will provide you robust security to the network
TL-SL5428E supports various user-friendly standard management features, such as intuitive web-based Graphical User Interface (GUI) or industry-standard Command Line Interface(CLI), either administration traffic can be protected through SSL or SSH encryptions. SNMP (v1/2/3) and RMON support enables the switch to be polled for valuable status information and send traps on abnormal events. This sharing of vital management information saves time and money. With link aggregation, spanning tree protocol (STP/RSTP/MSTP) and virtual stack, a highly intelligent and scalable topology could be established, fulfilling the enterprise customers requirement of building a unified, resilient network
To integrate voice, data and video service on one network, TL-SL5428E applies rich QoS policies. Administrator can designate the priority of the traffic based on a variety of means including IP or MAC address, TCP or UDP port number, etc, so voice and video are always clear, smooth and jitter free. In conjunction with the Voice VLAN the switch supporting, the voice applications will operate with much smoother performance
For other multimedia-on-demand application such as IPTV, TL-SL5428E provides advanced features for easy stream management. For example, IGMP snooping ensures the switch intelligently forward the multicast stream only to the appropriate subscribers while IGMP throttling and filtering restrict each subscriber on a port level to prevent unauthorized multicast access
ACL, 802.1X Authentication, Port Security, IP Filtering, Storm control, DHCP Snooping, IP Source Guard and DoS Defend provide you robust security strategy
Single-IP-Management supports virtual stack of 32 units
L2/L3/L4 QoS and IGMP snooping optimize voice and video application
SNMP, RMON, WEB/CLI/Telnet Log-in bring abundant management policies
Link aggregation (LACP) increases aggregated bandwidth, optimizing the transport of business critical data
IEEE 802.1s Multiple Spanning Tree, provides high link availability in multiple VLAN environments
Support IEEE 802.1d/w/s Spanning Tree (STP/RSTP/MSTP)
IGMP snooping allows the forwarding of multicast packets such as streaming audio and video, without increasing network broadcast congestion
Non-blocking Layer 2 Switching Capacity
GVRP (GARP VLAN Registration Protocol) allows automatic learning and dynamic assignment of VLANs
Supports up to 4K VLANs simultaneously (out of 4K VLAN IDs)
Q-in-Q increases the network scalability by providing a hierarchical structure
Supports 802.1P, Class of Service (CoS) with 4 priority queues per port
Rate limiting confines the traffic flow accurately according to the pre-set value
Supports multiple industry standard user authentication methods such as 802.1x, RADIUS Authentication, Supports 512 IP-MAC-Port-VID Binding entries
IP Source Guard prevents IP spoofing attacks such as DoS
Port Security enhances the security of all ports
L2/L3/L4 Access Control Lists restrict untrusted access to the protected resource
LLDP serves to reduce the complexities of the network
Virtual stackable provides high scalability and easy Single-IP-Management
Supports Telnet, Cisco like CLI, SNMP v1/v2/v3, RMON and web access
Supports SSL and SSH encryptions
Port Mirroring enables monitoring selected ingress/egress traffic
HARDWARE FEATURES
PERFORMANCE
SOFTWARE FEATURES
OTHERS
Shipping within Australia
All parcels are shipped from our distribution centre in Sydney NSW, Australia.
REGULAR POST:
- FREE for orders over $75 (item exclusions apply)*
- $9.95 for orders under $75 (item exclusions apply)*
- 1-6 Business Days Delivery Time
- Every Parcel with Registered Postage and Tracking Information
- For bulky orders which may involve pallets, we may clarify freight costs if the destination is rural and may require forklift access
- Depending on size of order and location, we may employ various reputable courier services. Some couriers we cooperate with:
- Fastway Couriers (Aramex)
- Go Logistics
- Toll
- TNT
- Northline
- Couriers Please
- DHL
- Should you have any enquiries regarding your location or postage, please do not hesitate to get in touch with us at any time.CONTACT US
*Shipping exclusions/freight charges apply include products such as boat wobble rollers and heavy/bulky items and some food/grocery ranges which require express shipping
EXPRESS POST (available for selected items):
For All In Stock Items via Australia Post Express or Equivalent courier
- $18.95 for all orders
- 1-3 Business Days (depending on your location)
- Our express parcels are shipped via Australia Post or equivalent courier service
- All orders are usually dispatched within 24-48 Hours of Payment on normal business days. Should any delays occur, we will be in touch immediately.
- We don't take responsibility for orders that are lost or stolen once the parcel has been delivered to the correct delivery address. Please confirm your address upon checkout.
- During peak periods including holiday season or promotional times, please expect slight delays with the processing of your order.
International Shipping
International orders are more than welcomed.
Please “Contact Us” by emailing us at service@superoffice.com.au to confirm accurate delivery charge to your desired country.
We utilise Australia Post International Services and International courier companies. We don't take responsibility for orders that are lost or stolen once the parcel has been delivered to the correct delivery address. Please confirm your address before purchasing.
Please be advised some countries are currently excluded in available shipping zones. We apologise for the inconvenience.
